PAss Functional Skills

Area and perimeter

Area and perimeter for A Level Engineering AQA Foundation: what it means, how to set the working out, and the questions it is asked in.
  • A Level
  • AQA
  • Engineering
  • Foundation
  • Spec S5 · S14
  • 14 min read
  • 6 revision boxes

Introduction

2 boxes
2 min read

What is area and perimeter?

Listen to this box

Transcript

A short spoken summary of area and perimeter and where it is used.

A spoken walk-through of area and perimeter before you read the notes.
This idea appears again in the higher-mark questions, so it is worth over-learning.
3 rows

The area and perimeter reference table

The examiner marks the working, so a correct answer with no method still drops marks.
The layout below is the one the mark scheme expects.

Diagram showing area and perimeter laid out step by step

The same idea drawn out, so the method is visible.
Term
Meaning
Example
Row 1 column 1
Row 1 column 2
a2+b2=c2a^2 + b^2 = c^2
Row 2 column 1
Row 2 column 2
a2+b2=c2a^2 + b^2 = c^2

Learning

2 boxes
4 steps

How to work with area and perimeter

Practise the routine version until it is automatic, then move to the multi-step questions.
The layout below is the one the mark scheme expects.

Diagram showing area and perimeter laid out step by step

The same idea drawn out, so the method is visible.
Worth knowing: a2+b2=c2a^2 + b^2 = c^2.
  1. Read the question and write down what is being asked for.
  2. Set out the working for area and perimeter in the order the method gives.
  3. Substitute the values and simplify.
Start from the definition and substitute the numbers the question gives you.
Simplify one line at a time: a2+b2=c2a^2 + b^2 = c^2.
Answer: a2+b2=c2a^2 + b^2 = c^2
2 rules

Key facts: Area and perimeter

Sketch the shape even when the question does not ask for one — it makes the next step obvious.
Worth knowing: ×10\times 10 moves every digit one column left.

  • Rule 1

    How area and perimeter behaves in the 1st of the cases the specification names.
    49=7\sqrt{49} = 7

  • Rule 2

    How area and perimeter behaves in the 2nd of the cases the specification names.
    49=7\sqrt{49} = 7

  • Rule 3

    How area and perimeter behaves in the 3rd of the cases the specification names.
    ≈160\approx 160

20 minutes

Get your predicted grade

Twenty questions gives you a predicted grade, your target, and the gap between them — plus the topics that close it fastest.
Get my predicted grade

Examples

2 boxes
4 marks · worked

Worked example: area and perimeter

The specification wording is precise here, and the mark scheme follows that wording exactly.
The layout below is the one the mark scheme expects.

Diagram showing area and perimeter laid out step by step

The same idea drawn out, so the method is visible.
Worth knowing: 34×25\frac{3}{4} \times \frac{2}{5}.
2 marks · worked

Practice question 6: 34×25\frac{3}{4} \times \frac{2}{5}

Work through the method one line at a time and write down what changes at each step.
Worth knowing: 34×25\frac{3}{4} \times \frac{2}{5}.

Practice bank

Thousands of revision questions

Every topic is backed by graded practice with instant marking and full solutions.
Try it now
Practice questions
3,000+
Topics
10
Marking and solutions
Instant

Common questions

How many marks is area and perimeter usually worth?
Between one and four, depending on how many steps the question asks for.
Is this on the A Level Engineering AQA Foundation paper?
Yes — it sits in the Causes and consequences strand.