Sampling and bias

Sampling and bias for Access to HE Environmental Science: what it means, how to set the working out, and the questions it is asked in.
  • Access to HE
  • Environmental Science
  • Spec N14
  • 9 min read
  • 8 revision boxes

Introduction

2 boxes
2 min read

What is sampling and bias?

Listen to this box

Transcript

A short spoken summary of sampling and bias and where it is used.

A spoken walk-through of sampling and bias before you read the notes.
Read the units in the question before you start; a converted unit is the most common slip.
6 rows

The sampling and bias reference table

The specification wording is precise here, and the mark scheme follows that wording exactly.
Term
Meaning
Example
Common slip
Marks
Row 1 column 1
Row 1 column 2
x2+5x+6=0x^2 + 5x + 6 = 0
Row 1 column 4
Row 1 column 5
Row 2 column 1
Row 2 column 2
160\approx 160
Row 2 column 4
Row 2 column 5
Row 3 column 1
Row 3 column 2
a2+b2=c2a^2 + b^2 = c^2
Row 3 column 4
Row 3 column 5

Learning

4 boxes
4 steps

How to work with sampling and bias

Work through the method one line at a time and write down what changes at each step.
Worth knowing: a2+b2=c2a^2 + b^2 = c^2.
  1. Read the question and write down what is being asked for.
  2. Set out the working for sampling and bias in the order the method gives.
  3. Substitute the values and simplify.
  4. Check the answer against an estimate before writing it down.
Start from the definition and substitute the numbers the question gives you.
Simplify one line at a time: x2+5x+6=0x^2 + 5x + 6 = 0.
Answer: 34×25\frac{3}{4} \times \frac{2}{5}
2 rules

Key facts: Sampling and bias

Check the answer against an estimate before you move on, so a place-value slip is caught here.
  • Rule 1

    How sampling and bias behaves in the 1st of the cases the specification names.
    49=7\sqrt{49} = 7
  • Rule 2

    How sampling and bias behaves in the 2nd of the cases the specification names.
    34×25\frac{3}{4} \times \frac{2}{5}
3 steps

How to work with sampling and bias

Read the units in the question before you start; a converted unit is the most common slip.
The layout below is the one the mark scheme expects.

Diagram showing sampling and bias laid out step by step

The same idea drawn out, so the method is visible.
  1. Read the question and write down what is being asked for.
  2. Set out the working for sampling and bias in the order the method gives.
  3. Substitute the values and simplify.
  4. Check the answer against an estimate before writing it down.
Start from the definition and substitute the numbers the question gives you.
Simplify one line at a time: x2+5x+6=0x^2 + 5x + 6 = 0.
Answer: 160\approx 160
3 rules

Key facts: Sampling and bias

The specification wording is precise here, and the mark scheme follows that wording exactly.
  • Rule 1

    How sampling and bias behaves in the 1st of the cases the specification names.
    ×10\times 10 moves every digit one column left
  • Rule 2

    How sampling and bias behaves in the 2nd of the cases the specification names.
    x2+5x+6=0x^2 + 5x + 6 = 0

20 minutes

Get your predicted grade

Twenty questions gives you a predicted grade, your target, and the gap between them — plus the topics that close it fastest.

Examples

2 boxes
3 marks · worked

Worked example: sampling and bias

Sketch the shape even when the question does not ask for one — it makes the next step obvious.
The layout below is the one the mark scheme expects.

Diagram showing sampling and bias laid out step by step

The same idea drawn out, so the method is visible.
Worth knowing: 34×25\frac{3}{4} \times \frac{2}{5}.
1 marks · worked

Practice question 8: 49=7\sqrt{49} = 7

Work through the method one line at a time and write down what changes at each step.
The layout below is the one the mark scheme expects.

Diagram showing sampling and bias laid out step by step

The same idea drawn out, so the method is visible.

Practice bank

Thousands of revision questions

Every topic is backed by graded practice with instant marking and full solutions.
Try it now
Practice questions
13,000+
Topics
10
Marking and solutions
Instant

Common questions

How many marks is sampling and bias usually worth?
Between one and four, depending on how many steps the question asks for.
Is this on the Access to HE Environmental Science paper?
Yes — it sits in the Programming strand.