PAss Functional Skills

Bearings and scale drawings

Bearings and scale drawings for Access to HE Health and Social Care: what it means, how to set the working out, and the questions it is asked in.
  • Access to HE
  • Health and Social Care
  • Spec G13
  • 10 min read
  • 6 revision boxes

Introduction

2 boxes
1 min read

What is bearings and scale drawings?

Listen to this box

Transcript

A short spoken summary of bearings and scale drawings and where it is used.

A spoken walk-through of bearings and scale drawings before you read the notes.
Check the answer against an estimate before you move on, so a place-value slip is caught here.
The layout below is the one the mark scheme expects.

Diagram showing bearings and scale drawings laid out step by step

The same idea drawn out, so the method is visible.
Worth knowing: ×10\times 10 moves every digit one column left.
6 rows

The bearings and scale drawings reference table

Work through the method one line at a time and write down what changes at each step.
The layout below is the one the mark scheme expects.

Diagram showing bearings and scale drawings laid out step by step

The same idea drawn out, so the method is visible.
Term
Meaning
Example
Row 1 column 1
Row 1 column 2
49=7\sqrt{49} = 7
Row 2 column 1
Row 2 column 2
x2+5x+6=0x^2 + 5x + 6 = 0

Learning

2 boxes
4 steps

How to work with bearings and scale drawings

The specification wording is precise here, and the mark scheme follows that wording exactly.
Worth knowing: ×10\times 10 moves every digit one column left.
  1. Read the question and write down what is being asked for.
  2. Set out the working for bearings and scale drawings in the order the method gives.
  3. Substitute the values and simplify.
  4. Check the answer against an estimate before writing it down.
Start from the definition and substitute the numbers the question gives you.
Simplify one line at a time: 49=7\sqrt{49} = 7.
Answer: 49=7\sqrt{49} = 7
3 rules

Key facts: Bearings and scale drawings

Read the units in the question before you start; a converted unit is the most common slip.

  • Rule 1

    How bearings and scale drawings behaves in the 1st of the cases the specification names.
    x2+5x+6=0x^2 + 5x + 6 = 0

  • Rule 2

    How bearings and scale drawings behaves in the 2nd of the cases the specification names.
    34×25\frac{3}{4} \times \frac{2}{5}

  • Rule 3

    How bearings and scale drawings behaves in the 3rd of the cases the specification names.
    ≈160\approx 160

20 minutes

Get your predicted grade

Twenty questions gives you a predicted grade, your target, and the gap between them — plus the topics that close it fastest.
Get my predicted grade

Examples

2 boxes
3 marks · worked

Worked example: bearings and scale drawings

Read the units in the question before you start; a converted unit is the most common slip.
The layout below is the one the mark scheme expects.

Diagram showing bearings and scale drawings laid out step by step

The same idea drawn out, so the method is visible.
1 marks · worked

Practice question 6: x2+5x+6=0x^2 + 5x + 6 = 0

This idea appears again in the higher-mark questions, so it is worth over-learning.

Practice bank

Thousands of revision questions

Every topic is backed by graded practice with instant marking and full solutions.
Try it now
Practice questions
17,000+
Topics
10
Marking and solutions
Instant

Common questions

How many marks is bearings and scale drawings usually worth?
Between one and four, depending on how many steps the question asks for.
Is this on the Access to HE Health and Social Care paper?
Yes — it sits in the Spoken language strand.