PAss Functional Skills

Bearings and scale drawings

Bearings and scale drawings for Functional Skills Physical Education: what it means, how to set the working out, and the questions it is asked in.
  • Functional Skills
  • Physical Education
  • Spec G19 · G13 · G5
  • 11 min read
  • 10 revision boxes

Introduction

2 boxes
3 min read

What is bearings and scale drawings?

Listen to this box

Transcript

A short spoken summary of bearings and scale drawings and where it is used.

A spoken walk-through of bearings and scale drawings before you read the notes.
Practise the routine version until it is automatic, then move to the multi-step questions.
2 rows

The bearings and scale drawings reference table

Sketch the shape even when the question does not ask for one — it makes the next step obvious.
The layout below is the one the mark scheme expects.

Diagram showing bearings and scale drawings laid out step by step

The same idea drawn out, so the method is visible.
Term
Meaning
Example
Row 1 column 1
Row 1 column 2
×10\times 10 moves every digit one column left
Row 2 column 1
Row 2 column 2
49=7\sqrt{49} = 7
Row 3 column 1
Row 3 column 2
34×25\frac{3}{4} \times \frac{2}{5}
Row 4 column 1
Row 4 column 2
×10\times 10 moves every digit one column left

Learning

6 boxes
3 steps

How to work with bearings and scale drawings

This idea appears again in the higher-mark questions, so it is worth over-learning.
Worth knowing: 34×25\frac{3}{4} \times \frac{2}{5}.
  1. Read the question and write down what is being asked for.
  2. Set out the working for bearings and scale drawings in the order the method gives.
  3. Substitute the values and simplify.
  4. Check the answer against an estimate before writing it down.
Start from the definition and substitute the numbers the question gives you.
Simplify one line at a time: 49=7\sqrt{49} = 7.
Answer: 49=7\sqrt{49} = 7
3 rules

Key facts: Bearings and scale drawings

The examiner marks the working, so a correct answer with no method still drops marks.

  • Rule 1

    How bearings and scale drawings behaves in the 1st of the cases the specification names.
    49=7\sqrt{49} = 7

  • Rule 2

    How bearings and scale drawings behaves in the 2nd of the cases the specification names.
    ≈160\approx 160
3 steps

How to work with bearings and scale drawings

Practise the routine version until it is automatic, then move to the multi-step questions.
Worth knowing: 34×25\frac{3}{4} \times \frac{2}{5}.
  1. Read the question and write down what is being asked for.
  2. Set out the working for bearings and scale drawings in the order the method gives.
  3. Substitute the values and simplify.
Start from the definition and substitute the numbers the question gives you.
Simplify one line at a time: 34×25\frac{3}{4} \times \frac{2}{5}.
Answer: ×10\times 10 moves every digit one column left
2 rules

Key facts: Bearings and scale drawings

Sketch the shape even when the question does not ask for one — it makes the next step obvious.
Worth knowing: 49=7\sqrt{49} = 7.

  • Rule 1

    How bearings and scale drawings behaves in the 1st of the cases the specification names.
    ×10\times 10 moves every digit one column left

  • Rule 2

    How bearings and scale drawings behaves in the 2nd of the cases the specification names.
    34×25\frac{3}{4} \times \frac{2}{5}
3 steps

How to work with bearings and scale drawings

This idea appears again in the higher-mark questions, so it is worth over-learning.
The layout below is the one the mark scheme expects.

Diagram showing bearings and scale drawings laid out step by step

The same idea drawn out, so the method is visible.
  1. Read the question and write down what is being asked for.
  2. Set out the working for bearings and scale drawings in the order the method gives.
  3. Substitute the values and simplify.
Start from the definition and substitute the numbers the question gives you.
Simplify one line at a time: ≈160\approx 160.
Answer: ×10\times 10 moves every digit one column left
3 rules

Key facts: Bearings and scale drawings

The examiner marks the working, so a correct answer with no method still drops marks.

  • Rule 1

    How bearings and scale drawings behaves in the 1st of the cases the specification names.
    34×25\frac{3}{4} \times \frac{2}{5}

  • Rule 2

    How bearings and scale drawings behaves in the 2nd of the cases the specification names.
    a2+b2=c2a^2 + b^2 = c^2

20 minutes

Get your predicted grade

Twenty questions gives you a predicted grade, your target, and the gap between them — plus the topics that close it fastest.
Get my predicted grade

Examples

2 boxes
3 marks · worked

Worked example: bearings and scale drawings

The specification wording is precise here, and the mark scheme follows that wording exactly.
Worth knowing: 34×25\frac{3}{4} \times \frac{2}{5}.
4 marks · worked

Practice question 10: 49=7\sqrt{49} = 7

The examiner marks the working, so a correct answer with no method still drops marks.
The layout below is the one the mark scheme expects.

Diagram showing bearings and scale drawings laid out step by step

The same idea drawn out, so the method is visible.
Worth knowing: 49=7\sqrt{49} = 7.

Practice bank

Thousands of revision questions

Every topic is backed by graded practice with instant marking and full solutions.
Try it now
Practice questions
3,000+
Topics
10
Marking and solutions
Instant

Common questions

How many marks is bearings and scale drawings usually worth?
Between one and four, depending on how many steps the question asks for.
Is this on the Functional Skills Physical Education paper?
Yes — it sits in the Spoken language strand.